Capalex Aluminium Extrusions

 

Introduction

Aluminium alloy 6463 is a medium strength alloy. Often referred to as a decorative alloy and can be chemically brightened to enhance this use.

 

Applications

Aluminium alloy 6463 is typically used in commercial and is highly suitable for anodising and polishing, or brightening. This makes it suitable for retail applications like shop fittings and trims. Also for domestic environments like kitchens and bathrooms.

The property of being abel to be highly polished also makes it suitable for automotive trims.

 

Aerospace materials are covered by the ‘L’ series of British standards.

 

6463 Aluminium Alloy Data Sheet

Properties given are typical and should only be used for comparisons of alloys. Actual values will depend on section specification.

            Mechanical Properties
Forming Machining Welding Brazing/Soldering Protective Anodising Aesthetic Anodising Temper Restrict Min N/mm Stress Min N/mm
Good Good Good Good Good Very
Good
0
F
T4
T5
T6
-
-
75
110
160
125max
-
125
150
195

 

Chemical Composition EN AW-6463
Si 0.2-0.6
Fe 0.15
Cu 0.20
Mn 0.05
Mg 0.45-0.9
Cr -
Zn 0.05
Ti -

(The chemical composition of aluminium and aluminium alloys is supplied in percentage by mass. Limits are expressed as a maximum unless shown as a range or a minimum)

 

 

Similar and obsolete specifications
ASTM B221