Capalex Aluminium Extrusions

 

Introduction

Aluminium alloy 2014 is a very high strength alloy. In certain tempers if offers good machining characteristics. Most often used in aerospace and defence equipment.

 

Applications

Alloy 2014 is commonly used for aerospace components and fittings due to its high strength. Other applications include; military vehicles, bridges, weapons manufacture and structural applications.

Aerospace materials are covered by the ‘L’ series of British standards.

 

2014 Aluminium Alloy Data Sheet

Properties given are typical and should only be used for comparisons of alloys. Actual values will depend on section specification.

            Mechanical Properties
Forming Machining Welding Brazing/Soldering Protective Anodising Aesthetic Anodising Temper Restrict Min N/mm Stress Min N/mm
Good Good Not Suitable Not Suitable Fair Not Suitable T4
T6
T6511
230
370
370
370
415
435

 

 

Chemical Composition EN AW-2014
Si 0.15-1.2
Fe 0.7
Cu 3.9-5.0
Mn 0.40-1.2
Mg 0.20-0.8
Cr 0.10
Zn 0.25
Ti 0.15
Others (each) 0.05
Others (total) 0.15
Aluminium Remainder

(The chemical composition of aluminium and aluminium alloys is supplied in percentage by mass. Limits are expressed as a maximum unless shown as a range or a minimum)

 

 

Similar and obsolete specifications
Al Cu4 Si Mg (AlCu4SiMg) UNS A92014
BS H15 ASTM B 221
AMS 4153 QQA 200/2