Capalex Aluminium Extrusions

 

Introduction

Aluminium Alloy 1050 is a popular aluminium for general sheet metal work where moderate strength is required. Also used in extrusions where high ductility and corrosion resistance is important. It generally gives a bright finish.

 

Applications

Alloy 1050 is known for its electrical conductivity and can be used for; automotive trim, chemical and food industry equipment, light reflectors and strips for heat exchangers.

 

1050 Aluminium Alloy Data Sheet

Properties given are typical and should only be used for comparisons of alloys. Actual values will depend on section specification.

 

            Mechanical Properties
Forming Machining Welding Brazing/Soldering Protective Anodising Aesthetic Anodising Temper Restrict Min N/mm Stress Min N/mm
Good Poor Good Good Excellent Excellent F - H18 - -

 

 

Chemical Composition EN AW-1050A
Si 0.25
Fe 0.40
Cu 0.05
Mn 0.05
Mg 0.05
Zn 0.07
Ti 0.05
Others 0.03
Aluminium 99.50

The chemical composition of aluminium and aluminium alloys is supplied in percentage by mass. Limits are expressed as a maximum unless shown as a range or a minimum.

 

 

Similar and obsolete specifications
AW1050A BS - 1B and 5L36
UNS A91050 DIN. WS 3.0255
UNS 1050A Al 99.5% Pure Aluminium (Al99.5)
A1050 (Australia) 3.0255 : Al 99.5 (Germany)
L-3051 (Spain) 4007 (Sweden)
A5 (France) UNI 9001/2 (Italy)